The price you sign is the price you pay. Every extra priced on day one. Nothing paid upfront. How it works
Services All services ExtensionsKitchensBathroomsLoft ConversionsRenovationsStructural Work
About Our Work Cost CalculatorLoft Conversion CostsExtension CostsGuides
Areas All areas BromsgroveAlvechurchBarnt GreenBlackwellRedditchBirminghamKings NortonNorthfieldSelly OakSolihullHalesowen
Contact Get a free quote
Home / Services / Structural Work
Structural Work

Structural work, done safely and signed off.

Steel beams, knock throughs and structural alterations across Bromsgrove and Birmingham, with full building control sign off.

Opening up a home is one of the most transformative things you can do, but it is also where you least want a corner cut. MTR Developments handles structural work across Bromsgrove and Birmingham, from removing a single wall to reshaping the whole ground floor.

We coordinate the structural engineer, install the steel beams, form the openings and get everything inspected and signed off by building control. Over 24 years we have made a lot of dark, boxy houses feel twice the size, safely and to the letter of the regulations.

There is no upfront payment on any of our work. You pay as the work progresses and never before.

Open plan kitchen and dining room formed by a structural opening
What we cover

What is included.

How it works

A clear process, start to finish.

01

Free consultation

We look at what you want to open up and talk through what is structurally possible.

02

Design and calculations

We arrange the structural engineer and calculations, and give you a clear quote for the works.

03

The works

One team installs the steels, forms the openings and makes good, working cleanly and safely.

04

Sign off

Building control inspects and signs off the work, and you only pay for what is complete.

What it costs

Guide prices, before you ring anyone.

Structural work is the part of a job where a cheap quote costs the most. Here is what it actually involves.

Structural steels and knock throughfrom £4,500
As part of a single storey extension£2,200 per m² build rate
Typical knock through, start to plaster1 to 2 weeks
Structural engineer's calculationsarranged as part of the job
Building control applicationarranged as part of the job

These are the same guide rates our cost calculator uses. They exclude VAT and professional fees, and they are a starting point rather than a quote. Your real price depends on the house, the ground, the access and the spec you pick, which is what the free survey is for.

Price your project
What moves the price

Where the money actually goes.

Two steels of the same length can be very different prices. These are the things that decide it.

Span and what sits above
A beam carrying a ceiling is a different section to a beam carrying a floor, a wall and a roof above it. The engineer sizes it from the loads, and the weight of the steel drives the price, the lifting and sometimes the need to get a second pair of hands or a lifting frame in.
Flush or dropped
A beam hidden in the ceiling void looks far better and costs more, because the joists have to be hung off it rather than sat on it. A dropped beam with a boxed bulkhead is cheaper and reads as a divide between two spaces.
Padstones and bearings
The beam is only as good as what it sits on. Each end needs a designed bearing, usually a concrete padstone, and in older houses the existing brickwork sometimes needs rebuilding locally to take the load.
Propping and access
Everything above has to be held up while the wall comes out. Acrow props and strongboys across two floors take a day to set and a day to strike, and they have to be designed into the sequence, not improvised.
Party walls
If the beam bears into a wall you share with a neighbour, that is notifiable work and the clock starts before the job does. Two months notice, which is why we raise it at the survey rather than the week before.
Chimney breasts
Removing a breast on one floor leaves the stack above it needing support, usually gallows brackets or a beam. Half the chimney problems we are called to fix were created by someone who removed the breast and left the stack sitting on nothing.
Planning and building regulations

The rules that decide what you can build.

Structural work does not usually need planning permission. It always needs building control, and often it needs your neighbour.

Planning permission
Not required to move or remove an internal wall. Required if the structural work is part of an extension that goes beyond permitted development, or if it changes the external appearance of a house in a conservation area with an Article 4 direction.
Building control is mandatory
Removing a load bearing wall alters the structure, so it needs building control approval and you have to provide a structural engineer's report with calculations. There is no permitted development equivalent and no way around it. We arrange both as part of the job.
Party Wall etc. Act 1996, section 2
Cutting a beam into a party wall, underpinning it, raising it or removing a chimney breast from it is section 2 work. Your neighbour needs at least two months written notice. This is the one that delays programmes, so we serve it early.
Section 1 and section 6
Building a new wall at the boundary needs one month notice. Excavating within 3 metres of a neighbouring building and deeper than its foundations, or within 6 metres and cutting a 45 degree line down from their foundations, also needs one month.
Silence is not consent
If a neighbour does not respond within 14 days of a notice, the Act treats a dispute as having arisen and surveyors have to be appointed. Knowing that changes how early you serve.
Structure, Part A
Governs loadings, beams, lintels, foundations and the stability of what remains. It is the home of the calculations, and it is why a structural engineer rather than a builder sizes the steel.
The rest of the house
Taking a wall out can change escape routes, ventilation and the position of circuits and radiators. Those have to be designed in, not discovered at second fix.

Rules current at October 2026. Approved Documents L and F are both replaced on 24 March 2027 and the new Part L reaches extensions and conversions, not just new builds, so insulation standards will move. We check the position on your house at the survey rather than working from a rule of thumb.

See it done

The case study shows a kitchen, dining and family room formed from two small rooms, with the original staircase kept and a new balustrade built around it.

View the case study
Good to know

Structural Work questions, answered.

Yes. We coordinate a structural engineer to produce the calculations and drawings, then build to them. You do not need to organise that separately.

Yes. Removing a load bearing wall and installing a steel beam to carry the load is one of our most common jobs. It is always designed by an engineer and signed off by building control.

We do. We arrange the inspections and the final sign off so the work is fully certified, which matters when you come to sell.

Correct. You pay in stages as the work progresses, never before it begins.

Usually one to two weeks from propping to plaster, plus the lead time on the steel and the engineer's calculations before we start. The noisy, dusty part is two or three days of it.

Only if your neighbour dissents or does not reply. Serve the notice, and if they consent in writing that is the end of it. If 14 days pass with no answer the Act treats it as a dispute and surveyors are appointed, which is why we serve early rather than late.

Yes for most knock throughs. The room is sheeted off, the dust is contained and the propping stays in for a few days. We agree which days will be loud so you can plan around them.

It is the designed bearing the end of a beam sits on, usually a concrete block, sized by the engineer to spread the load into the wall. Skip it, or guess the size, and you concentrate several tonnes onto brickwork that was never meant to take it. It is a cheap component and a serious one.

Keep exploring

Related services.

Guides

Related guides.

Start your project

Let's talk about your project.

Tell us what you are planning and we will arrange a free, no obligation visit and quote. No upfront payment, ever.